Home > Blog > Led Display from Worklamp - Part 4

Led Display from Worklamp - Part 4

Posted by admin on February 24, 2012

Another Update:

I now have basic serial communication working!
No control codes yet, like wipe, backspace, etc, but the receiving and processing part works, so should not be an issue.

Next To Do: Those controlcodes, and serial graphics..

For now, a video of the first communication tests. And click on full blog post for links to the earlier posts, with a more extensive explanation of the workings, and a component overview. My Homebrewn MSP430 code will follow once its a bit cleaned up and commented

For more info check the earlier blog posts here: 

Part 1

Part 2

Part 3


Posted by Jean on
I'm shckoed that I found this info so easily.
Posted by Johnetta on
Hey, kilelr job on that one you guys!
Posted by Hollie on
Always a good job right here. Keep rolling on thuhogr. http://cuapyjjogx.com [url=http://pinbcx.com]pinbcx[/url] [link=http://vvbeynq.com]vvbeynq[/link]
Posted by Elouise on
Well put, sir, well put. I'll ceairtnly make note of that.
Posted by Lucky on
Normally I'm against killing but this article sleeahtgrud my ignorance. http://dcpmzwuytn.com [url=http://ttfoawg.com]ttfoawg[/url] [link=http://oaxdlurz.com]oaxdlurz[/link]
Posted by GuestSpona on
guest test post
http://googlee.te/ simple
Posted by GuestSpona on
guest test post
http://googlee.te/ simple
Posted by CharlesLaw on
??????????? ???????????
???????????? ????????????
???? ?????????? ????????????
??????????? ?????? ???????????
?????? ? ????
?????? ????????????
?????? ??????? ? ????????????
?????? ??????????? ????????????
??????? ??????????? ???????????
Leave a Reply

(Your email will not be publicly displayed.)

Please type the letters and numbers shown in the image.Captcha Code